LED Solar Stop Sign - Standard Visibility Model

LED Solar Stop Sign - Standard Visibility Model

In stock

SKU
Y5200

Options

As low as: $936.45

Description / LED Solar Stop Sign - Standard Visibility Model

Our LED Solar Stop Sign - Standard Visibility Model is a bright, eye-catching solution to enhance road safety and visibility in low-light conditions, helping drivers easily identify stopping points. Built with premium quality, built for durability materials, this LED stop sign helps ensure long-lasting performance and is well-suited for roadways, parking lots, and intersections.

Standard LED Stop Sign includes
  • The Standard LED Stop Sign R1-1 is designed for installation on both new and existing poles.
  • Sign comes in various sizes and reflective grades to suit your specific needs.
  • MUTCD Compliant.
  • LED flashing operates 24/7.
  • Flashing LEDs enhance safety at intersections by increasing driver awareness of traffic control signs.
  • Improved visibility both during the day and at night.
  • With its adjustable tilting solar panel, it charges in just 6-8 hours and provides up to 48 hours of continuous use.
  • Easily monitor the battery percentage digitally to stay informed about when a recharge is needed.
Back Controller Octagon

Solar Panel Unit and LED Specifications
Modes 24/7 Flash or Flash from Dusk to Dawn
Battery 12V 7,500 mAh Rechargeable Lithium-Ion Battery
Battery Life 6-8 hours to fully charge / up to 48 hours of use
Solar Panel 18V 22W
LEDs 8 LEDs (0.5W each)
LED Colors Red
Reflective Grades EG, HIP, DG

Standard LED Stop Sign Installation

Step by Step Installation Provided Below:

LED Stop Sign Hardware
1. Secure the sign to the post using
The provided mounting bolts.
LED Stop Sign Hardware
2. Position the bracket and screw for
The solar panel in their designated locations.
LED Stop Sign Hardware
3. Use a socket wrench to adjust the
Bracket's angle, then tighten the screw securely.
LED Stop Sign Hardware
4. Align the solar panel with the bracket,
Then place the solar panel into position.
LED Stop Sign Hardware
5. Use an Allen key to tighten the two
Set screws, securing the solar panel to the bracket.
LED Stop Sign Hardware
6. Connect the cable from the solar panel
To the cable from the battery.
LED Stop Sign Hardware
7. Turn the orange key on the battery to
Switch between functions: Off, 24/7 flashing,
And night mode (dusk to dawn) flashing.
LED Stop Sign Hardware
8. Press the small button next to the
Digital display to check the battery charge.
The first press shows the battery percentage,
The second displays the voltage (100% = 12.5V),
And the third press turns off the display.
Write Your Own Review
Only registered users can write reviews. Please Sign in or create an account